Art Peel SUL

for Solvent/Latex Inks

Inkjet Printable Wall Fabric with Repositionable Adhesive

  • * Apply to nearly any surface and remain adhered for either short-term or long-term use
  • * Remove and reuse as many times as you want, without any loss of tack
  • * Resistant to shrinking, curling, ripping, and wrinkling
  • * Will not leave sticky residue on the wall after removal
  • * Suitable for indoor and outdoor* use (*with solvent/latex inks)
  • * Available in either a high-opacity Blockout, or Standard version
  • * 100% polyester woven fabric
  • * 160gsm / 7mil (release liner backing adds 100gsm / 5mil)
  • * To increase longevity, add spray top coat or film laminate
  • * Great for wall murals, wallpaper, booth display, fine art, indoor/outdoor signage, and more
  • * Download our Art Peel Quick Start Guide for getting started quickly

Note: This version of Art Peel is to be used with SOLVENT inks. For the aqueous version, click here.

Rolls are currently available in 50' lengths, but will eventually be 100' instead.

DOWNLOADS & DOCUMENTS

inkjet wall decor quick start guide     inkjet wall decor quick start guide     inkjet wall decor data sheet

DESCRIPTION

160GSM, 7MIL BRIGHT WHITE, REPOSITIONABLE WALL ADHESIVE, EXTRAORDINARY PRINT QUALITY

Art Peel SUL is not your average printable wall fabric; it is designed to bring your art to life through outstanding print quality, deep, rich colors, and crisp resolution that your art deserves. Use it for wall graphics, wall murals, stickers, labels, and anything else your creativity allows. Art Peel SUL was designed for either indoor or outdoor use.

Art Peel SUL is compatible with ECO-Solvent and high-quality solvent, latex, and UV inks.

Looking for the aqueous version? Find it here . Not sure which one you need? Give us a call and we will get you setup. 866-722-6567.

COMPATIBLE INKJET PRINTERS

This Product has been compatibility tested and approved for the following printers. If you do not see your printer listed below, it does not mean it is not compatible but that we have not tested and approved your printer at this time.

This Product has been compatibility tested and approved for the following printers. If you do not see your printer listed below, it does not mean it is not compatible but that we have not tested and approved your printer at this time.

Epson

GS6000 , SureColor S30670, S50670, S70670

Roland

SolJet Pro II Series: All Eco-Sol and MAX Ink

SolJet Pro III Series: XJ-740, XJ-640

SolJet Pro 4 Series: XR-640, XF-640

VersaArt: RE-640

VersaCAMM: VS-640, VS-540, VS-420, VS-300, SP-540i, SP-300i

VersaSTUDIO: BN-20

VersaUV: LEJ-640, LEC-540, LEC-330, LEC300A, LEF-12

HP

Designjet L26500, Designjet L28500, HP Designjet L65500, HP Scitex LX600, HP Scitex LX820, HP Scitex LX850, Solvent, Low-Solvent, and UV Flatbed

Mimaki

JV-3-160SP, JV3-250SP, JV3-75SPII, JV33, JV5

Mutoh

Tomahawk, Falcon II, Toucan LT (Eco-Solvent Plus Ink), ValueJet 1204, ValueJet 1324, ValueJet 1624, ValueJet 1638, ValueJet 2638

Oce

Arizona 318 GL, Arizona 440 GT, Arizona 440 XT, Arizona 460 GT, Arizona 460 XT, Arizona 480 GT, Arizona 480 XT, Arizona 550 GT, Arizona 550 XT

EFI Vutek

GS5000r, GS3250r, GS3250LX, GS3250, GS2000LX, GS2000, QS3 Pro, QS2 Pro, QS3250r, QS3220, QS2000

Durst

All Durst printers using solvent, eco-sol, UV, and latex ink

  Retail Qty
Art Peel SUL, Blockout - 24"x10' $2999
Art Peel SUL, Blockout - 54"x50' $21375
Art Peel SUL, Blockout - 60"x50' $23750
Art Peel SUL, Standard - 24"x10' $2499
Art Peel SUL, Standard - 54"x50' $19800
Art Peel SUL, Standard - 60"x50' $22000
Add to Cart
(0 Products)